123 HP Com Setup and Installation Procedure
- You will receive the printer in a well-recovered box when purchasing the hp printer. You must be patient to unbox your fresh hp printer. Follow the directions as per 123.hp.com setup step by step to the hp printer setup.
- To unbox the printer, you must first clear the packaging materials.
- Smoothly handle the printer components to prevent harm to the hp printer.
- Take the power cable out next. Connect it to the printer and energy source for an energy connection.
- Turn the printer on to continue.
- Feed the documents into the paper tray. Take a lot of clean documents and order them without curls or wrinkles.
- Finally, pull the internal chamber, place the documents and close the chamber.
- Install the ink cartridges on the corresponding slots after inserting the document.
On every 123.hp.com setup printer ink slot, you will notice a color tape for the right insertion of the cartridge.
HP Printer Driver Download by 123.hp.com/setup and Installation Setup
Here you discover measures for the configuration of the hp printer driver software. This means that the printer software is downloaded and installed. Use the directions to download and install the effective hp printer driver.
- Turn on the HP printer and computer for the first time. Open the search engine of your choice from your desktop.
- Go to 123.hp.com setup now, open the search engine.
- You should understand the model number of your hp printer. Type the model number for your 123 hp printer to use
- the finest printing driver software package.
- Choose the finest printer driver based on your operating system.
- Next, press the Download option and the download method will start in a few seconds.
- Go to the folder Download and select the printer software file.
- Finally, run your computer software file to benefit from printing experience Ref 123 HP Com Setup for installation of hp printers to MAC devices or hp printers to windows devices.
123 HP Com Printer Wireless Setup
You can connect all Wi-Fi equipment with a hp wireless printer configuration. 123.hp.com setup Wireless. The following chapter provides the Wi-Fi Direct facility. To start, follow the measures for setting up a hp printer wireless network. Refer to 123.hp.com setup if you need help.
- First of all, direct to the control panel of the printer. Search for the Wi-Fi Direct choice now.
- Click on the Wi-Fi Direct choice once it is discovered. Then scroll down to option Settings.
- If you discover the alternative Turn On, press on it. This enables Wi-Fi on your printer.
- The direct Wi-Fi technique allows you to connect up to five wireless devices.
- Even if the device has a USB connection, use this technique.
- Check the device’s internet connection before starting.
- Open the software for HP Printer. Go to the Tools option first. Additionally, open Device Setup Software.
- Select Connect a fresh device option afterward.
- Click the Wireless choice for up to five wireless devices.
- You have finished the wireless configuration for the 123 hp printer Setup with the steps above.
- Your printer also promotes the Wireless Setup hp printer for mobile devices.
- See 123.hp.com setup and find out how to set up wireless internet on a printer.
Troubleshooting Tips to Fix HP Printer not Printing Properly
There may be a time when you might get irritated with HP Printer for not printing properly or printing black when you have chosen color printing. Or, it is printing blank, printing colorful vertical lines, the print job is slow or hangs in between while printing, and other unusual problems. The issues may seem to be minor, but if proper attention isn’t given to it, then it may turn out to be severe. Are you looking for the solution to fix HP Printer printing black when you have commanded color? Then, have a look at the below short blog to get immediate help.
Some of the similar issues associated with HP Printer printing issue-
- HP color printer only prints black
- Color images printed in black and white
- HP Printer not printing color ink
- My color HP Printer keeps printing in black and white
- HP Printer only printing black and white
The possible reason for HP Printer issues-
- Ink cartridges issue
- The new ink cartridges can’t be recognized by the HP Printer
- The mistake may be from your side
- HP Printer has a manufacturing defect
- Color ink cartridges are empty
The quick steps to resolve HP Printer ink cartridges issue-
- You need to check the HP Printer ink cartridges level.
- In case, of HP Printer low ink levels, you need to replace the same.
- You need to clean the HP Printer print head with an automated tool.
- You need to replace the defected ink cartridges.
- Check the ink cartridges level and refill it in case of empty cartridges.
- Try to use the original HP ink cartridges for your printer.
- You need to generate a paper to test if the problem resolved or not.
We hope that the reliable solutions mentioned above have helped you in resolving the HP printer not printing properly problem.
